Introduction :
Tablets to improve electrical conductivity in aluminium.
Quantity To Be Use :
100 ams per 100kg MELT.
Preheat Furnace OR Crucibles to red hot condition.
Charge in ingot and scrap.
As soon as the charge reaches a pasty from, sprinkle Cover Flux-11 over its surface to form a cover.
Add remainder of charge and melt rapidly.
When the melt is ready, introduce Degasser - 22 tablets to remove harmful gases from the melt. After the degassing action has ceased add recommended amount of Grain Refiner - 21 tablets to get the desired grain refining.
Move the plunger into the melt properly for proper mixing of the tablet. This will help you to get uniform grain structure.
Remove the plunger from the melt and sprinkle a quantity of Cover Flux - 5 on the surface of the melt and rabble the flux layer into the melt to obtain a red glowing dross free from metal.
Precautions :
CKCO FLUXES should not be allowed to be exposed to the atmosphere when not in use.
Use hand gloves while handling and using fluxes.
Packing :
5 Tablets of 100 gms. are rolled in moisture proof aluminium foil and further packed 25 Kgs. Paper Carton.
This information Contained in this leaflet can undergo technical changes without notice. Customers are advised to ascertain suitability for their own use without any liability occurring to the manufacturers. All specification and condition are subject to change without notice.
