Lube Coat 10 Download PDF
Introduction :
Lube coat - 10 is a Water Based Coating. It contains graphite with some binders and additives. It is applied to obtain a smoothest finish.
Application :
It is mainly used in gravity die casting and other general casting techniques.
It is also used in non-ferrous alloy manufacturing units.
It is also used in non-ferrous alloy manufacturing units.
Advantages :
Easy application, easy to store and can be stored for a longer period.
Gives good surface finish.
User can change the thickness level of the coating by adding water as per need and hence can obtain the paste as required.
It helps in solidification of casting.
Gives good surface finish.
User can change the thickness level of the coating by adding water as per need and hence can obtain the paste as required.
It helps in solidification of casting.
How To Use :
Lubecoat-10 should be used directly from the packed drum or can be diluted with water depending upon the application.
Stir it thoroughly before use.
It can be applied on the surface through brush or by spray.
Clean the surface before applying the coat.
It can be applied in many layers as required.
Stir it thoroughly before use.
It can be applied on the surface through brush or by spray.
Clean the surface before applying the coat.
It can be applied in many layers as required.
Precautions :
This coating is not dangerous to skin but still hand gloves should be used while handling and using it.
Packing :
5 kg Jar /50 kg Plastic Drum or as required.
